Involvement of the Lipopolysaccharides of Azospirilla in the Interaction with Wheat Seedling Roots

The present study was undertaken to comparatively investigate the attachment capacities of Azospirillum brasilenseSp245 and its lipopolysaccharide-defective Omegon-Km mutants KM018 and KM252, as well as their activities with respect to the alteration of the morphology of wheat seedling root hairs. The adsorption dynamics of the parent Sp245 and mutant KM252 strains of azospirilla on the seedling roots of the soft spring wheat cv. Saratovskaya 29 were similar; however, the attachment capacity of the mutant KM252 was lower than that of the parent strain throughout the incubation period (15 min to 48 h). The mutation led to a considerable decrease in the hydrophobicity of the Azospirillumcell surface. The lipopolysaccharides extracted from the outer membrane of A. brasilenseSp245 and mutant cells with hot phenol and purified by chromatographic methods were found to induce the deformation of the wheat seedling root hairs, the lipopolysaccharide of the parent strain being the most active in this respect. The role of the carbohydrate moiety of lipopolysaccharides in the interaction of Azospirillumcells with plants is discussed.     

Adsorption and immobilisation of human insulin on graphene monoxide,silicon carbide and boron nitride nanosheets investigated by molecular dynamics simulation

The adsorption and immobilisation of human insulin onto the bio-compatible nanosheets including graphene monoxide, silicon carbide and boron nitride nanosheets were studied by molecular dynamics simulation at the temperature of 310 K. After equilibration, heating and 100 ns production molecular dynamic runs, it was found that the insulin was adsorbed and immobilised onto the considered surfaces in a native folded state. The structural parameters, including root-mean-square deviation and fluctuation, surface accessible solvent area, radius of gyration (R_g) and the distance between the centre of the mass of immobilised protein and the surface of the considered nanosheets, were measured, analysed and discussed. The energetics of the studied systems such as the interaction energy between protein and nanosheet was also measured and addressed. The discussions were centred on the structural and energetic parameters of the protein and nanosheets, including charge density, hydrophobicity, hydrophilicity and residue polarity. The results also showed that the active site of C-termini of chain B played an important role in the adsorption process and this could be helpful in the protection of insulin in its smart delivery and release applications.     

The effect of diffusion and convection on the rate of transfer of solutes across an interface

The transfer of substances across the interface between water and a membrane or between water and a solvent occurs in series with transport up to and away from the interface. These processes have been difficult to resolve. Recently D. M. Miller (Biochim Biophys Acta 856: 27–35, 1986) has used a moving drop technique to measure the rates of transfer of short-chain alcohols and tritiated water between water andn-octanol. This technique produces equivalent unstirred layers which are less than about 10 m thick. Based on the trends in the observed rates of phase transfer, he proposes that the transfer is limited by the actual interfacial step. If so, water-oil interfacial transfer would be sufficiently slow to limit the rate of permeation of lipid membranes by these substances. It is shown here that the observed rates of phase transfer can be explained quantitatively if they are limited by convection or by diffusion across the combination of 5–10 m unstirred layers both inside and outside the moving drops. For water, comparison of the observed rates with the rate of evaporation from a clean surface, suggests that the interfacial step at the water-octanol interface is not rate-limiting.     

The effect of lime on phosphorus adsorption and barley growth in three acid soils

For three acid soils from Santa Catarina, Brazil, lime application and time of incubation with lime had little effect on the adsorption of added phosphorus. In two soils with high contents of exchangeable aluminium, solution P and isotopically exchangeable P were decreased by incubating with lime for 1 month: phosphorus was probably adsorbing on freshly precipitated aluminium hydrous oxides. In one soil with less exchangeable aluminium, P in solution was increased by liming. After 23 months lime increased solution and exchangeable P possibly due to crystallization of aluminium hydrous oxides reducing the number of sites for P adsorption. All these changes were however small. In a pot experiment, lime and phosphorus markedly increased barley shoot and root dry matter and P uptake. Although liming reduced P availability measured by solution P, isotopically exchangeable P and resin extractable P, it increased phosphorus uptake by reducing aluminium toxicity and promoting better root growth. The soil aluminium saturation was reduced by liming, but the concentration of aluminium in roots changed only slightly. The roots accumulated aluminium without apparently being damaged.     

Biofilm reactors in anaerobic wastewater treatment

Attached biofilm reactors provide the means for implementing energy-efficient anaerobic wastewater treatment at full scale. Progress has been made in the development of fixed, expanded and fluidized bed anaerobic processes by addressing fundamental reactor design issues. Several new biofilm reactor concepts have evolved from recent studies.     

Peat,zeolite and basalt as adsorbents of ammoniacal nitrogen during manure decomposition

The effectiveness of sphagnum peat, zeolite (clinoptilonite) and basalt in reducing ammonia losses during aerobic manure decomposition was determined in an incubation experiment. Peat placed in the spent air-stream adsorbed all of the ammonia volatilized during the first 8 days of decomposition, and reduced overall ammonia losses by 59%. Zeolite reduced total ammonia losses by 16%, and basalt by 6%.All adsorbents were considerably less effective in reducing ammonia losses when mixed with the manure. Reductions in ammonia losses of 24% and 1.5% were obtained with the peat and zeolite, respectively. The addition of basalt increased losses.Ammonia and ammonium adsorption isotherms were determined for the three materials. The adsorption capacities and affinity terms of the adsorbents calculated from the isotherms, reflected their ability to reduce ammonia losses in the incubation experiment. Zeolite had both the highest affinity for ammonium and the highest ammonium adsorption capacity. The peat had a very high affinity for ammonia and a high adsorption capacity (23.4 mg NH₃–N g^–1), whereas zeolite and basalt had a much lower adsorption capacity (1.8 and 0.05 mg NH₃–N g^–1, respectively) compared with their capacity to adsorb ammonium (18.1 and 0.18 mg NH₄–N g^–1).     

Sediment transport in an inland river in North Queensland

Rivers in northern Queensland are ephemeral and carry water mainly as a direct response to heavy rainfall. Sediment is transported downstream with the runoff and sediment deposition may be a major problem in many proposed reservoirs. Hence information about sediment transport, particularly under high flow conditions, is required for planning and design of water storage reservoirs. In this region, bed material samples can be obtained during low flow periods and suspended sediment sampling during floods is possible but only with difficulty. Little reliable data is available.This paper outlines a possible approach to predicting sediment loads in such rivers. Suspended sediment samples have been analysed to give both particulate concentrations and their grain size distributions. The latter have been compared with bed material size distributions, and the concentrations of suspended bed material and wash load components have been estimated.After investigations of a number of methods for predicting bed material transport, those which treat bed load and suspended load independently have been selected. Field data have been used to determine the wash load and the suspended bed material load. The bed load was then computed so that the total sediment load could be determined.This approach has been applied to the Flinders River at Glendower, based on field data obtained by the Queensland Water Resources Commission in 1982/83.     

Fixed bed porous glass sphere (porosphere) bioreactors for animal cells

Process intensity of fixed bed glass sphere culture systems is increased considerably by replacing solid glass spheres with open pore glass spheres. This technique demonstrates the possibility of having a system capable of both volumetric and cell density scale up and being suitable for substrate attached and suspension cells. The yields achieved for a number of attached cell lines (approximately 10⁷/ml) demonstrate an increase approaching one order of magnitude over solid glass spheres (approximately 10⁶/ml). Also suspension cells were successfully entrapped in the open pore structure with similar yields.     

Separation of insect hemolymph proteins by cascade-mode multi-affinity chromatography.

The hemolymph of the adult female Manduca sexta was fractionated by cascade-mode multi-affinity chromatography (CASMAC) on a main-line tandem column chain containing Zn(2+)-TED, T-gel, Ni(2+)-DPA, and phenylsepharose and a side-line column containing Zn(2+)-DPA. The technique separated some of the previously described major hemolymph proteins, and yielded a number of fractions with simple composition. Some of these fractions contained only less abundant proteins of Manduca hemolymph. Thus, it appears that CASMAC would be a very useful fractionation technique for purification and characterization of the minor proteins of insect hemolymph.     

The membrane dialysis bioreactor with integrated radial-flow fixed bed —a new approach for continuous cultivation of animal cells

A hybridoma cell was cultivated continuously in a membrane dialysis bioreactor with an integrated radial-flow fixed bed consisting of porous Siran^® carriers over a period of 6 weeks. Antibodies accumulated to an average of 100 mg l^?1, approx. 10 times more than in fixed bed cultures without dialysis membrane. Serum costs could be reduced about 85% due to an appropriate feeding strategy. Siran^® carriers with 3–5 mm diameter showed an advantage compared to those with 1–2 mm diameter. For the 3–5 mm carrier the specific glucose uptake rate and the MAb production rate were constant, if the velocity was between 0.09 mm s^?1 and 0.75 mm s^?1. At higher velocities cells are washed out of the bed. Furthermore antibody consistency and cell stability were verified in long-term cultivations over a period of 96 days. From an estimation of the antibody concentration reachable with the reactor concept under optimal conditions a concentration 45 times higher compared to axial-flow fixed bed reactors and 11 times higher compared to stirred tank reactors can be expected.